Digital Storage Oscilloscopes

To provide the best match to your measurement needs, PC Instruments manufactures separate families of oscilloscopes as described below.   Select an oscilloscope family to the left to view detailed information about a particular model.

PCI-44x Series Oscilloscopes

The PCI-44x Series includes the PCI-441, the PCI-442, the PCI-443, and the PCI-444.  These four models have the features and performance suitable for capturing a wide variety of signals, including high speed transient signals.  Typical applications for these instruments include:

	Video, TV, and HDTV Measurements,
	High Voltage Impulse Testing,
	Power Electronics,
	Sensor Output Measurements,
	Ultrasound (Industrial and Medical),
	Radar, Sonar, and Lidar Systems,
	Laser Detectors, Photo Luminescence, and Other Materials Testing,
	Shock and Vibration Studies,
	Modulated Communications Signals, and
	Telephony.

The PCI-443 Single Channel Digital Oscilloscope and the PCI-444 Dual Channel Oscilloscope feature 12-bit resolution at rates to 40 MSPS, ten input voltage ranges, advanced trigger features, and advanced data acquisition modes. The PCI-441 Single Channel Oscilloscope and the PCI-442 Dual Channel Oscilloscope are economical oscilloscopes with 10-bit resolution at rates up to 40 MSPS.

PCI-42x/43x Series Oscilloscopes

The PCI-42x and PCI-43x series feature bandwidths from 100 MHz to 300 MHz, and include 8 different products that specialize in capturing a combination of high bandwidth repetitive signals and transients.  Typical applications for these instruments include:

	Electronic Sub-Assembly Testing,
	ATE Systems,
	Disk Drive Testing,
	Passive and Active Component Analysis,
	Clock Distribution Measurements,
	Analytical and Non-Destructive Evaluation Instruments, and
	Network Analysis.

PCI-426/436 Sampling Oscilloscopes

The PCI-426 and PCI-436 sampling oscilloscopes are specialized instruments that feature a 2GHz analog bandwidth and repetitive sampling timebases from 1us/div down to 500ps/div.  These instruments provide 50 Ohm BNC inputs and are best suited to applications such as:

	Time Domain Reflectometry (TDR),
	High Speed Digital (pulse) Measurements,
	Analog Component Pulse Response (e.g. DACs and Op-Amps),
	High Speed Laser Detector Measurements,
	Nuclear Magnetic Resonance (NMR) Carriers,
	Wireless Carrier Analysis,
	High Speed Serial Bus Pulse Response (e.g. Firewire, IEEE-1394), and
	TDMA Power Ramp-Up Analysis.

| Home | Products | Software | Application Notes | Prices & Ordering | Contact Us |

The contents of this site and the PC Instruments logo are copyright ©2003, PC Instruments, Inc.
Send comments to info@pcinstruments.com
PC Instruments, Inc. • Lawrence, Kansas 66047 USA • (785) 856-8700